Product ID:CATALYST 59
MSDS Date:09/22/1989
FSC:8040
NIIN:01-053-5602
MSDS Number: BGJGF

Emergency Phone: 617-935-4850

Info Phone: 617-938-8630

Cage: OB562

Telephone: 617-935-4850

Cage: 04552

3-AMINOPROPYLTRIETHOXYSILANE

CAS: 919-30-2

RTECS: TX2100000

Fraction By Weight: 100%

Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: VERY SEVERE IRRITATION
UPON CONTACT; CAN CAUSE PERMANENT DAMAGE OR BLINDNESS. SKIN:
IRRITATION UPON DIRECT CONTACT. INGEST: HARMFUL IF SWALLOWED. NO
CHRONIC HAZARD NOTED.
Explanation of Carcinogenicity:NOT LISTED
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE NOTED

First Aid:EYES: FLUSH EYES WITH WATER AND CONTINUE FLUSHING UNTIL
MEDICAL ATTENTION IS OBTAINED. SKIN: REMOVE CONTAMINATED CLOTHING
AND WASH AFFECTED AREA WITH WATER. INGEST: KILUTE WITH LARGE
QUANTITIES OF WAT ER. INDUCE VOMITING ONLY IF VICTIM IS CONSCIOUS
AND ALERT. GET IMMEDIATE MEDICAL ATTENTION.

Flash Point Method:PMCC
Flash Point:160F,71C
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP LEAK.
EVACUATE AREA.DO NOT TOUCH SPILLAGE. SM SPILL:ABSORB W. INERT
ABSORBENT. PLACE IN CLOSED CONTAINER. FLUSH AREA W. WATER. LG
SPILL: DIKE AHEAD FOR LATER DISPOSAL. NOTIFY AUTHORITIES.

Handling and Storage Precautions:STORE IN A COOL AREA.AVOID CONTACT
WITHSKIN,EYES AND CLOTHES.KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:NONE

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:MECHANICAL(GENERAL) RECOMMENDED,LOCAL EXHAUST IF NEEDED
Protective Gloves:RUBBER/PLASTIC
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
VAPOR DENSITY IS AN ESTIMATE. MATERIAL IS PART OF KIT.PART A IS THE
RESIN AND ALSO LOCATED UNDER THIS NSN.PART B IS THE CURING AGENT TO
BE USED WITH THE RESIN IN EPOXY FORMULATIONS KEY1:N1

HCC:V4
Boiling Pt:B.P. Text:425F,218C
Vapor Pres:<1
Vapor Density:> AIR
Spec Gravity:0.95
Evaporation Rate & Reference:2
Solubility in Water:SOLUBLE (HYDROLIZES)
Appearance and Odor:CLEAR LIQUID

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, STRONG BASES. HYDROLYSIS IN WATER MAY BE RAPID AND
EXOTHERMIC.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN
FLAMES; STORAGE IN OPEN CONTAINERS, UNCONTROLLED MIXING W/ INCOMP.
SUBSTANCES.
Hazardous Decomposition Products:SILICON DIOXIDE,OXIDES OF NITROGEN,CO
AND CO*2

Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.